New User:

-or-
Username:
Password:
Forgot your password?

Stock Market & Financial Investment News

News Breaks
February 26, 2013
15:02 EDTSSNSamson Oil & Gas initiated with a Neutral at Sidoti
News For SSN From The Last 14 Days
Check below for free stories on SSN the last two weeks.
Sign up for a free trial to see the rest of the stories you've been missing.
July 29, 2014
05:08 EDTSSNSamson Oil & Gas provides operational advisory
Subscribe for More Information
July 22, 2014
05:05 EDTSSNSamson Oil & Gas provides operational advisory
The 4-1/2 inch production liner has been set and cemented successfully in the Bootleg 7-14-15TFH well. Frontier Rig 24 is currently drilling the vertical portion of the wellbore at 8,549 feet on the Bootleg 6-14-15TFH. Once the Bootleg 6-14-15 TFH is drilled the rig will then be moved to the north pad and begin drilling the two Ironbank wells. A work over rig completed running the rod string on Matilda Bay 2, and the well is now flowing. The Matilda Bay 1 is currently undergoing a liner repair. Following this work over the fracture stimulation program will be completed. As previously advised further consideration is being given to testing a zone in the Bluff 1-11 wellbore in the primary target, the Permian Hartville Formation. The Gladys 1-20 H well is being drilled by Continental Resources. The well is a 1,280 acre lateral, approximately 10,000 feet, in the middle Bakken. The curve has been drilled and landed in the Middle Bakken, and 7 inch casing has been run and cemented and a depth of 10,436 feet. A work over rig was moved onto the well July 16th to re-establish production. Rods were parted at the top of the pump. Tubing was pulled to retrieve the pump. Tubing, rods, and a new pump were run back in hole, and the well was put on production July 18th. Since then, the well has flowed 317 bbls oil at a rate of 159 BOPD.
July 15, 2014
05:16 EDTSSNSamson Oil & Gas provides operational advisory
Subscribe for More Information

Sign up for a free trial to see the rest of the stories you've been missing.

I agree to the theflyonthewall.com disclaimer & terms of use